E series waterproof strip light

E series waterproof strip light adopt epoxy resin as the shell, this new type of strips have many features, such as long lifespan, high stability, energy-saving, beautiful design etc. This products can use for rough environment between 5℃～40℃. Use unique glue filling technology, waterproof can be IP65, can be safe for the outdoor use. With unique glue filling method, the strip lighting shine will be more brightness, color will be more uniform and brilliant.

Warning

Do not connect to power as product is packing

Do not connect to power before install completely

Replace cracked protective Cover

Pay attention to keep away from fire, electricity, shaking

Please read the specification carefully before install, and keep the specification for future use

Please read this specification carefully before install product, and keep this document for future reference

Attention:

Corrosivity or deliquescent chemicals will destroy the cover of the strip

Normally working temperature is 5℃~40℃，If use out of the limited, will be effect the lifetime of the strip; Stock temperature is: 5~60℃;Our company will not respond if use with other accessories which not supply from our company.

Product Parameter

Structure:

Common fault and elimination method

If the fixture couldn't work, please check whether the power supply on through and the switch on the through position .
If the fixture sometimes couldn't work, please check the power supply whether loose connect or under the fetch way .
Notice: if the fixture still couldn't normal work by above the way , please contact with professional maintenance personnel to maintenance.

Installation instruction
As the 3M tape on the back, so please attention the cleanliness of the exterior
If install on the winding object, avoid the electronic component on the winding dot, the winding angel must more than 90°
avoid to install on the surface of the needle and coarse object.

Precautions: 

1. Do not use rough objects or cleaner to wipe products in the process of using, also do not use high-voltage water to wash products, because it will damage the waterproof parts of lamp shell. Do not use sharp objects to scratch products, also do not bend from side, extrusion, and screw the products, because it will damage internal components. Do not pull strips with excessive force; otherwise, products will be damaged.

2. can use for both indoor and outdoor , recommended ambient temperature should be -5 degrees ~ +40 degrees.

3. Do good waterproof measures when you use in the cut states.