Welcome to Iightstrade.com!

Nice appearance No UV AC100-240v t8 led tube lamp

MOQ :1 piece

Lead Time :15 Days

Seller Support : Trade Authenticity Guaranteed & Accepting

Payment : L/C,T/T,Western Union, Money Gram, Credit Card, Paypal

Product details

Supply Ability

  • Supply Ability:50000 piecesWarranty(Year):2 Year

Product Specifications

Product Description

Product Introduction

Advantage of ILLUSION T8 LED Tube:

Super stabilized: adopt built-in power supply solution, use 6063 aluminum for the tube body

 as heat sink,present stable quality performance. 

Super bright: adopt the brightest SMD3528 led for currently led technology. 

Use milky or transparent PC materials for the Tube cover, greatly reduce the glare effect.

Nice appearance: T8 pin as unibody design

Energy Saving: constant-current driving, super low power consumption, the power efficiency

 for light nearly close to 100%. 

◆Environmental friendly: No UV,NO infrared, also no heating & mercury release risks. 

Long lifespan: 30000~50000hrs, 10 times than the traditional fluorescent tube.

Super protection for power driver: protection for short-circuit, open circuit and overcurrent, etc..

 

Dimension

Diagrammatic drawing for End cap copper-pin rotating 90-degrees

Technical parametersBased on 6300K

Wiring Diagram

Product installation instructions

Inductance type fixture

1. Turn off the power 

2. Remove the traditional tube or old tube.

3. Remove the starter

4. Install the LED tube

Electric type fixture:

1Turn off the power 

2Remove the traditional tube or old tube.

3、Remove the electronic ballast then follow the wiring diagram as below to connect it.

4Install the led tube.

Attention: 

Led tube could be installed directly to replace traditional tube for the traditional T8,T10 fixtures 

(Just take off the Starter is ok).

Led tube must work with the correct voltage as the specification(rated voltage)

Do not open the led tube by yourself.

We recommend you remove the inductive ballast, for indoor use.

Notes

Such led tube cannot replace emergency light

●We recommend that the suitable working temperature should be -20?C ~ + 40?C for our led tube, if exceed this range, will bring bad situation for product lifetime. 

The product installation & maintenance should be operated by professional guys. 

This product performance is being improved unceasingly, like has the change, not separate informs even slightly.

 

 

 

You May Like