SMD5730 2-LED Injection Waterproof Module

SMD5730 2- LED Injection waterproof Module is the newest goods designed by our company. Which adopt high brightness, large viewing angle and good consistency SMD5730 LED as light source. The led adopts silica gel material package, high efficiency, working 1000Hrs at rated working condition without light fades, Lifespan is 50000Hrs. Working voltage is DC12V, built-in constant-current circuit, safe for using. Low power consumption, long lifespan, no need to maintenance. Anti-static, anti-UV, flame-retardant engineering plastics shell, strong weather resistance,no change of color. Beautiful, generous, elegant high-end.Widely used in advertising decoration, indoor decoration, scenic tour indoor and outdoor environments, Can adapt to different temperature and humidity, the good quality materials guarantee the goodswill not be damaged during the transportation and installation process.

Product picture:

Warning:

Please do not connect power supply when the light is still in box.

Please do not connect high voltage before installation, and make sure that the fixture connect earth.

Change the protection cover completely if it was broken.

Pay attention to anti-fire, anti-electricity and anti-shake.

Please kindly read the instructions before installation, and keep it well for your future reference.

Please kindly read the instructions before installation, and keep it well for your future reference. 

Notice:

Caustic or dissolved chemicals may damage the protection crust.

Normal working temperature : -40℃-60℃, if overrun the range, it will effect the lifespan of lamp. Storage temperature is -50~80℃

We will takes no responsibility,  Bad consequences made by some components which are not provided by our company

Technical parameters:

Color coordinates figure

Size(mm):

Installation M

Instruction:

1、The dimension of the wire is based on the following conditions:

* The possible maximum current

*Power Consumption

*Length of wire(Max: 5 meters)

*The loss of Low-voltage transmission

2、The maximum connecting quantity:  20pcs.

3、Outlet of the module should be treated with good waterproof.

4、Static touching / static working are prohibited.

5、Recommend the use of switching power supply (with a short-circuit overvoltage, overload and past the Safety certification).

6、Collision, Extruding and over buckling are prohibited.

7、The installation place should be flat, clean and dry.

8、During the transportation, they are could not be exposed to the rain and technicalvibration.

9、The working environment of the power supply and control must be in a good ventilation and dry air.

10: generally ,the switching power supply should only used 80-90% of the power

11:Please make sure gray wire connect the anode, white wire connect the negative.

Lumens depreciation picture：

Packing(mm):

20pcs / string, 100pcs / bag, Net Weight for a single module: 14g

antistatic bag dimension：230*330*0.075mm

If there is something unclear about this instructions, please query from a engineers who holding qualification certificates!