New Super LED wall washer

uProduct Name

New Super LED wall washer（single color and RGB）

l  Warning

1. When the product is in the packing box, please do not connect the power;

2, Please do not connect the high-voltage power supply before installation, and make sure that the equipment connects earth;

3.Replace any protection cover once it is broken;

4. Pay attention to keep far from fire, electricity and shake.

5. Please read the instruction carefully before installing the product, and preserve this document for future reference.

l  Attention

1.      Corrosive or solubility chemicals will damage of the protective shell of lights；

2.      The working temperature is －20℃~45℃，and humidity is 0~95％. The lifetime will be adversely affected when beyond this scope. Storage temperature：-35~70℃；

3.      Please advise that we are not responsible for the effect when the components not from ILLUSION adopted.

uProduct Introduction

A.  Adopt built-in 1W high power LED as light source, single color and RGB

type, can emit excellent light effects and magnificent colors.

B.  This new type Wall washer made up of two parts, first part is light body and the other one includes power supply and controller box, which makes this wall washer different with other wall washers.

C.  It has lighter weight, safe and stable quality and it is easy for maintenance. The unique isolated module design makes better waterproof, longer lifespan, and better heat dissipation, easier control.

D.  Hand in hand connection among lights, signals, power supply, makes easier installation, more conveniently connection..

E, There are 14 kinds of build-in programs which can be operated at the DMX window. This wall washer can also be controlled by outside DMX 512 controller or super DMX Console to achieve more different lighting effects. It can achieve whole or isolated light effect control.

uApplication

It can be widely used for all kinds of wall lighting decoration, as well as in stage, meeting room, ancient building crowd, and civilization plaza etc.

uTechnique Parameter:

uWorking temperature

uConnection Ports

RGB Wall Washer

1,Light Body part:

  One pc 24VDC power supply input terminal:  2-pin male waterproof connector(connect with the 2-pin female connector of power supply)

  One pc standard DMX signal input terminal:  3-pin male connector(connect with the 3-pin female connector of controller part)

2, Power supply and controller parts:

  One pc high voltage input terminal: 3-pin bare wire

  One pc 24VDC power supply output terminal:   2-pin waterproof female connector

  One pc standard DMX signal input terminal:  3-pin male waterproof connector(light signal input use)

  One pc standard DMX signal output terminal:  3-pin female waterproof connector (connect with next light)

  One pc standard DMX signal output terminal:  3-pin female waterproof connector ( connected with the three-pin male connector of light body ,signal output to light body )

1,Light Body part:

  One pc 24VDC power supply input terminal:  2-pin male waterproof connector(connect with the 2-pin female connector of power supply)

2, Power supply and controller parts:

  One pc high voltage input terminal: 3-pin bare wire

  One pc 24VDC power supply output terminal:   2-pin waterproof female connector

Standard length of connection wire: (wire of controller an power supply)：

uSingle Color wall washer luminous intensity diagram:

uDimension diagram

●“L1” stands for the whole length of wall washer

0.6 m wall washer:L1=614mm,    0.9 m wall washer :L1=914mm，     1.2m wall washer :L1=1214mm

●“L2” stands for the length between the middle of two location brackets

 0.6 m wall washer:L1=512 mm,   0.9 m wall washer灯:L1=682 mm，     1.2m wall washer:L1=962mm

Diagram for installation and connection

   1. single color wall washer, can be lighted up with power on

2. The connection way of RGB colors, as follows:

Remark: Each line, the total of wall washer can not exceed of 30 pcs.

uAttention:

l  Please consider about” the working condition”, the lamp can not be put in water for long time

l  Each 0.6m RGB wall washer takes up 6 DMX addresses, the former wall washer’s address plus 6 is the address for the next one.

Each 0.9m RGB wall washer takes up 9 DMX addresses, the former wall washer’s address plus 9 is the address for the next one.

Each 1.2m RGB wall washer takes up 12 DMX addresses, the former wall washer’s address plus 12 is the address for the next one.

l  If you want all connected wall washers to change colors together, you should set the same address for all the washers.

l  Please set the address from smaller to bigger.

l  The maximum address of RGB wall washer should be less than 510.

l  There should be only one main flood light as a master (the flood light works in main control mode, control box or control console).

l  When there are many  wall washer  connected together, the connections please refer to the connection diagram.

l  The connection cable between two controllers, or between console and signal amplifiers. It can’t exceed 100m; The distance between the first signals amplifier or console and the last flood light can’t exceed 100m.

uInstruction for installation

1.      The wire of power supply and signal of last wall washer of each loop should be used tail plug for waterproof

2.      Please make sure there is no short circuit before turn on the power, otherwise the parts of the device would be burn out.

3.      Around the lamp should fill with some gravel or sand when installation, it is better for the heat rink and drainage. And make sure there is no corrosive, inflammability and explosive material around.

Note: A. Make sure the power is be turned off while installation or dismounting.

     B. Please replace with new lamp when the lamp body is defected.

uProblems and solutions:

1. If the light cannot light up, please check whether it connects with power supply well and whether the switch is on.

2. If the light turns on and off frequently, please check whether the connection between power and lamp is fixed enough.

Note: Please contact professionals in case of above solutions do not work; please try to contact professionals instead of open the light at once.