Non-waterproof LED flexible strip

We use the latest FPC production process, which makes brightness doubled. The PCB board is made of high quality material which can bear high temperature; the lighting color is equal and colorful; the products make 12 led as a unit and you can cut into different length. The back of products use 3 M sticky tape, Ultra-thin designs and low power supply made installation and operation more convenient. It is widely used for indoor and outdoor decoration, signs or backlights, etc.

Picture：

Warning

Please do not connect power supply when the light is still in box.

Please do not connect high voltage before the installation, and make sure that the fixture connectsthe earth.

Change the lamp at once if it is broken.

Pay attention tofire, electricity and shake.

Please kindly read the instructions beforeinstallation, and keep it well for your future reference

Notice

1.    Caustic or dissolvent chemicals may damage the light.

2. The normal working temperature is0℃-40℃, or it is bad for the lifespan. The storage temperature is 0~60℃.

3. If the light becomes broken because of misuse of other accessories which are not from our company, we are not responsible this issue.

Dimension:

Connection：

Name：

LR1041：3528Double row non-waterproof LED flexible strip, 5m,1200 chip，white,15MM board, DC24V

Installation：

●The products are with 3M sticky tape at back, so the surface of installation should be clean and no any oil, powder.

●If you want to install at surface of curved products, please avoid electrical component at curved surface and the angle should be <90°.

●Please try to don’t install at sharp and rough surface.

Common problem and Solutions

●  Please check if power supply is connected, or if the switch is in the connected position when the light does not work.

●  If the lamp lights on and off frequently, please check connection between power supply and strip in case that it is loose.

Note：If the lights still does not work well after trying the methods above, please contactprofessionals staff for help.

Attentions

●Please do not use rough or cleanser to clean this products, do not use high press water to wash this product that it would be harmful for the waterproof components.

●Please do not use sharp equipment to stab this product, or it may broken the internal components.

● Please do not pull or press too much on the products.

● Once the light reaches the lifespan, please contact your local relative authority or retailer to ask for recycle suggestion.

● Recommended working environment temperature is -20~40℃.

● Please do not use the light if the fixture or wire has problem, check and repair firstly.

●The light should be installed by professionals.

﹡If there is any change for the product, we will not inform again.

﹡If you have any question about the specification, please ask qualified engineers for help.